Window - HP 54501A Programming Reference Manual

WINDOW
WINDOW
command/query
Command Syntax:
Example:
Query Syntax:
Returned Format:
Example:
The :TIMEBASE:WINDOW
command controls whether or not the
second timebase
is in use.
If
this
command
is set
to
ON
the second
timebase
is
displayed
on the
bottom half of the
screen.
When
the
Timebase
Window
is on, all measurements
are taken
on the second
(expanded)
timebase.
When the Timebase Window
is
on the second timebase data can be
acquired over
the HP-IB
by sending
the command
WAVEFORM:DATA?,
however care must be taken in order to ensure
valid data is
present when the data
is requested.
The
WINDOW
query returns the current
state
of
this
command.
:TlMebase:WINDow
{{ON | 1} | {OFF | 0}}
OUTPUT 707;":TIM:WlND
1"
:TIMbase:WlNDow?
[:TlMebase:WINDow] {1
| 0}<NL>
DIM Tw$[50]
OUTPUT
707;":TIMEBASE:WINDOW?"
ENTER 707;°Tw$
PRINT Tw$
HP 54501A
Programming
Timebase Subsystem
15-7