Delay - HP 54501A Programming Reference Manual

DELay
DELay
command/query
The
:TRIGGER:DELAY
command
is valid only in the Delay Trigger
Mode. This
command allows you to set
a
delay value
in either time or
number of
events.
In
the time delay mode, this
command specifies
the
delay
value in seconds.
In
the events
delay mode,
this command specifies
the
delay
value in
number of trigger
events.
The Delay
query returns
the current
delay
setting.
Command Syntax:
:TRIGger:DELay{TIME,<time_value>
| EVENt,<event_value>}
Where:
Example:
Query Syntax:
Returned Format:
<time_value > ::
=
time of delay from 30 ns to 160 ms
< event_value > ::=
number
of
events
from 1
to
16000000
OUTPUT 707;":TRIGGER:DELAYTIME,1.23E-01"
:TRIGger:DELay?
[:TRIGger: DELay]
{TIME,
< time_value >
|
EVENt,
< event_value >
}
<
NL
>
Where:
<time_value > ::
=
time of
delay from 30 ns to 160 ms
<
event_value
>
::=
number of
events
from
1 to 16000000
Example: DIM vaiue$[50]
OUTPUT 707;":TRIG:DELAY?"
ENTER 707;Value$
PRINT Value$
Trigger Subsystem
1&-16
HP
54501A
Programming