NetCol5000-A 42 kW Air Cooled In-row Precision Air
Conditioner
User Manual
----End
6.18 How to Silence the Buzzer
Context
Silencing the buzzer: After the buzzer is silenced, it does not buzz when a new alarm is
generated.
Procedure
Step 1 Tap the
silenced, the icon changes to
----End
6.19 How to Enable a Humidity and Temperature Sensor
Context
Procedure
Step 1 On the home screen, choose Settings > System Settings > Common Settings.
Step 2 Set Cold-aisle sensor 1 and Cold-aisle sensor 2 to Enable, as shown in
Figure 6-25 Common Settings
Issue 01 (2017-07-27)
After the system is restored to factory settings, the user password is also reset to the preset password,
and must be promptly modified to ensure information security and normal system running.
icon in the status bar and tap Off to silence the buzzer. After the buzzer is
A humidity and temperature sensor needs to be enabled after it is installed in an aisle.
If you need to enable a humidity and temperature sensor, log in as the admin user.
This section describes how to enable Cold-aisle sensor 1 and Cold-aisle sensor 2.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
.
6 FAQ
Figure
6-25.
236