Siemens SINUMERIK 840C Operator's Manual page 41

2 Operator Interface
Changing mode
groups
Channel switchover
2-12
The NC channels are grouped together in mode groups. With the SINUMERIK
840C up to 2 mode groups can be selected.
Machine manufacturer
Please note:
The channels are assigned to mode groups by the machine manufacturer!
• Pressing this key once switches to the next higher channel number, referred
to the number displayed in the channel status field.
• Pressing the key again switches on to the next
channel or back.
• The channel can be selected directly by entering the channel number and
then operating the key.
• The NC area of the SINUMERIK 840C is divided into a maximum of six
channels.
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99