Siemens SINUMERIK 840C Operator's Manual page 5

01.99
Preliminary Remarks
How the
documentation is
organized
Target group
Standard scope
Help
The SINUMERIK documentation is organized in four parts:
•
General documentation
•
User documentation
•
Manufacturer / service documentation
•
OEM documentation
This documentation has been written for machine tool users. The publication
provides detailed information required by the user for operating the
SINUMERIK 840C OEM Version for Windows™.
This Operator's Guide only describes functions that are part of the standard
scope. Options or modifications carried out by the machine-tool manufacturer
are documented by the machine-tool manufacturer.
More information on other SINUMERIK 840C publications and on
publications which are available for all SINUMERIK controls (e.g. "Universal
Interface", "Measuring Cycles" ...) can be obtained from your Siemens local
branch office.
Other functions not described in this documentation might also be executable
in the control. This does not, however, represent an oblication to supply such
functions with a new control or when servicing.
Note
For better orientation, the following information is provided in the appendix:
•
List of Abbreviations
•
Glossary