The Operating Elements Of The Machine Control Panel - Siemens SINUMERIK 840C Operator's Manual

01.99
2.2.4

The operating elements of the machine control panel

Machine control panel
for a milling machine
Machine control panel
for a turning machine
Fig. 2-4 Machine control panels
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
[ . ] 1
10 100
1000 10000
[ . ] 1
10 100
1000 10000
Machine tool operations such as traversing of the axes or program start can
only be triggered via a machine control panel.
The machine tool can be equipped with a standard Siemens machine control
panel or with a special machine control panel from the machine tool
manufacturer.
A maximum of two mode groups is possible.
The standard Siemens machine control panel is described. Should another
machine control panel be used, please refer to the Operator's Guide of the
machine tool manufacturer.
X Y Z 80 90
70
4 5 6
60
7 8 9
50 120
%
+
-
+X +C 80 90
100
70
-Z +Z
60
-C -X
50 120
%
6FC5198-6AA60-0BP1
2 Operator Interface
60 70
40
80
20
90
100
10
100
6
110
110
2
120
0
%
60
70
40
80
20
90
10
100
6
110
110
2
120
0
%
2-13