Position Of Workpiece For Turning - Siemens Sinumerik 840D sl Programming Manual

● Rapid retraction: POLF[AX]
● Movement in tool direction: MOVT
● Smooth approach and retraction:
G140 to G143, G147, G148, G247, G248, G347, G348, G340, G341
9.4

Position of workpiece for turning

Axis identifiers
The two geometry axes perpendicular to one another are usually called:
Longitudinal axis
Transverse axis
Workpiece zero
Whereas the machine zero is permanently defined, the workpiece zero can be freely selected
on the longitudinal axis. Generally the workpiece zero is on the front or rear side of the
workpiece.
Both the machine and the workpiece zero are on the turning center. The settable offset on the
X axis is therefore zero.
M
W
Z
X
G54 to G599
or TRANS
Fundamentals
Programming Manual, 01/2015, 6FC5398-1BP40-5BA2
= Z axis (abscissa)
= X axis (ordinate)
Machine zero
Workpiece zero
Longitudinal axis
Transverse axis
Call for the position of the workpiece zero
Geometry settings
9.4 Position of workpiece for turning
161