Working Area Limitation; Working Area Limitation In Bcs (G25/G26, Walimon, Walimof) - Siemens Sinumerik 840D sl Programming Manual

Examples
Program code
N10 G91 G64 F100
N20 X1 Y1
N30 WRTPR("N30")
N40 X1 Y1
N50 WRTPR("N50",1)
N60 X1 Y1
15.3

Working area limitation

15.3.1

Working area limitation in BCS (G25/G26, WALIMON, WALIMOF)

G25/G26 limits the working area (working field, working space) in which the tool can traverse.
The areas outside the working area limitations defined with G25/G26 are inhibited for any tool
motion.
Fundamentals
Programming Manual, 01/2015, 6FC5398-1BP40-5BA2
Default value: 0
Value Meaning
0 To write the string, a dedicated main run block is not gen‐
erated. This is realized in the next NC block that can be
executed. Active continuous-path mode is not interrupted.
1 To write the string, a dedicated main run block is gener‐
ated. Active continuous-path mode is interrupted.
Comment
; continuous path mode
; The string "N30" is first written to N40.
; Continuous-path mode is kept.
; The string "N50" is written to N50.
; Continuous-path mode is interrupted.
Supplementary commands
15.3 Working area limitation
349