Siemens Sinumerik 840D sl Programming Manual page 401

Operation Type
1)
for explanations, see legend (Page 417).
1) 2) 3) 4) 5)
G641 G
G642 G
G643 G
G644 G
G645 G
G700 G
G710 G
6)
G810 , ..., G819 G
6)
G820 , ..., G829 G
6)
G931 G
G942 G
G952 G
G961 G
G962 G
G971 G
G972 G
G973 G
GEOAX P
GET P
GETACTT F
GETACTTD F
GETD P
GETDNO F
GETEXET P
GETFREELOC P
GETSELT P
GETT F
Fundamentals
Programming Manual, 01/2015, 6FC5398-1BP40-5BA2
Meaning
Continuous-path mode with smoothing as per
distance criterion (= programmable rounding
clearance)
Continuous-path mode with smoothing within
the defined tolerances
Continuous-path mode with smoothing within
the defined tolerances (block-internal)
Continuous-path mode with smoothing with max‐
imum possible dynamic response
Continuous-path mode with smoothing and tan‐
gential block transitions within the defined toler‐
ances
Inch dimensions for geometric and technological
specifications (lengths, feedrate)
Metric dimensions for geometric and technolog‐
ical specifications (lengths, feedrate)
G group reserved for the OEM user
G group reserved for the OEM user
Feedrate specified by traversing time
Freeze linear feedrate and constant cutting rate
or spindle speed
Freeze revolutional feedrate and constant cut‐
ting rate or spindle speed
Constant cutting rate and linear feedrate
Linear or revolutional feedrate and constant cut‐
ting rate
Freeze spindle speed and linear feedrate
Freeze linear or revolutional feedrate and con‐
stant spindle speed
Revolutional feedrate without spindle speed lim‐
itation
Assign new channel axes to geometry axes 1 - 3
Replace enabled axis between channels
Gets active tool from a group of tools with the
same name
Gets the T number associated with an absolute
D number
Replace axis directly between channels
Returns the D number of a cutting edge (CE) of
a tool (T)
Reading of the loaded T number
Find a free space in the magazine for a given tool
Return selected T number
Get T number for tool name
W TP SA Description see
2) 3) 4)
m + PGsl
m + PGsl
m + PGsl
m + PGsl
m + PGsl
m + + PGsl
m + + PGsl
+ PGAsl
+ PGAsl
m +
m +
m +
m + PGsl
m + PGsl
m + PGsl
m + PGsl
m + PGsl
+ - PGAsl
+ + PGAsl
+ - FBWsl
+ - PGAsl
+ - PGAsl
+ - PGAsl
+ - FBWsl
+ - FBWsl
+ - FBWsl
+ - FBWsl
Tables
17.1 Operations
5)
401