Control Units, Control Unit Adapters and operating components
7.8 Basic Operator Panel BOP20
Note
The BOP20 may be inserted or withdrawn while the Control Unit is operational.
Removal
1. Simultaneously press the latching cams on the BOP20.
2. Keep the latching cams pressed together and pull the BOP20 straight out.
3. Insert the blanking cover.
Display and operator controls of the BOP20
Additional information on the display and operating elements of the BOP20 can be taken
from the following reference:
Reference: /IH1/ SINAMICS S120 Commissioning Manual with STARTER
288
Manual, (GH6), 07/2016, 6SL3097-4AL00-0BP5
AC Drive