Accessories
9.2 DRIVE-CLiQ coupling
9.2
DRIVE-CLiQ coupling
9.2.1
Description
The DRIVE-CLiQ coupling is used to connect 2 DRIVE-CLiQ cables in accordance with
degree of protection IP67 acc. to IEC 60529.
In addition to the data lines, the power supply contacts of DRIVE-CLiQ are also routed via
the coupling.
You can find information on the permissible cable length in Chapter DRIVE-CLiQ signal
cables (Page 361)
NOTICE
Damage through use of incorrect DRIVE-CLiQ cables
Damage or malfunctions can occur on the devices or system when incorrect or unreleased
DRIVE-CLiQ cables are used.
• Only use suitable DRIVE-CLiQ cables that have been released by Siemens for the
9.2.2
Interface description
9.2.2.1
Overview
①
②
Figure 9-10
342
respective application.
Rating plate
Protective cap, Yamaichi, Article No.: Y-ConAS-24-S
Interface overview, DRIVE-CLiQ coupling
Manual, (GH6), 07/2016, 6SL3097-4AL00-0BP5
AC Drive