Kenwood TKR-750 Programming Reference Manual page 18

4 FILE MENU
" Multi-table
The configure "Multi-table" parameters are printed.
(Refer to 6.11 Multi-table Window.)
The "Multi-table" parameters will be
Checked
printed out.
Range
The "Multi-table" parameters will
Unchecked
not be printed out.
Default Unchecked
" CW Message
The configured "CW Message" parameters are
printed. (Refer to 6.12 CW Message Window.)
The "CW Message" parameters
Checked
will be printed out.
Range
The "CW Message" parameters
Unchecked
will not be printed out.
Default Unchecked
" Test Frequency
The configured "Test Frequency" parameters are
printed. (Refer to 6.13 Test Frequency Window.)
The "Test Frequency" parameters
Checked
will be printed out.
Range
The "Test Frequency" parameters
Unchecked
will not be printed out.
Default Unchecked
" Embedded Message
The configured "Embedded Message" parameters are
printed. (Refer to 6.14 Embedded Message Window.)
The "Embedded Message"
Checked
parameters will be printed out.
Range
The "Embedded Message"
Unchecked
parameters will not be printed out.
Default Checked
" Embedded Message w/Password
The configured "Embedded Message w/Password"
parameters are printed.
Message w/Password Window.)
The "Embedded Message w/
Checked Password" parameters will be
printed.
Range
The "Embedded Message w/
Unchecked Password" parameter will not be
printed out.
Default Unchecked
" Channel Information
13
(Refer to 6.15 Embedded
Field Programming Reference (FPRG)
The configured "Channel Information" parameters are
printed. (Refer to 6.1 Channel Information.)
The "Channel Information"
Checked
parameters will be printed out.
Range
The "Channel Information"
Unchecked
parameters will not be printed out.
Default Unchecked
" Start Channel - End Channel
It is possible to choice the start channel and end
channel only when the "Channel Information" check
box is checked.
You can select the channel to print from the channels
1 to 16.
Note: The value of the "Start Channel" must be lower than the
"End Channel" value. The End Channel will be equal to
the Start Channel if you enter the higher value in the
Start Channel than the End Channel.
Start Channel End Channel
Range
1 - 16
1 - 16 (Channel)
(Channel)
Default 1 16
" CW ID
It is possible to select the CW ID only when the
"Channel Information" checkbox is checked.
You can configure the CW ID parameters to print.
(Refer to 6.3 CW ID Window.)
The CW ID parameters will be
Checked
printed out.
Range
The CW ID parameters will not be
Unchecked
printed out.
Default Unchecked
" "Print Setup" Button
Click "Print Setup" to view the "Print Setup" window.
You can configure the printer used to print out the
configuration data, the paper size, and the paper
rotation.
" "Print Preview" Button
Click "Print Preview" to view the "Print Preview"
window. (Refer to 4.6 Print Preview.)
Version: 1.01