Aux Tab - Kenwood TKR-750 Programming Reference Manual

6 EDIT MENU

6.10.2 AUX Tab

It can configure functions assigned to the AUX Input port,
AUX Output port, and the AUX Input/Output port in this
tab.
Figure 6-20 AUX tab
" AUX Input Trigger (AUX Input)
This is a method to detect the signal applied to the
Auxiliary Input ports Select "Level" or "Down Edge"
from the dropdown list.
Perform the trigger detection when the
Level
port is in Active Low.
Range
Perform the trigger detection with
Down Edge
Down Edge on the input signal.
Function Name
None Not perform any operation.
When the signal is applied to one of the PF [AUX Out 1 Off] - PF [AUX Out 5 Off] input ports, the function
AUX Out 1 Off
assigned to the Auxiliary Output port is deactivated.
-
You can assign this function when "Selectable" is configure to the Auxiliary Output ports 1 to 5.
AUX Out 5 Off
6-7 Assigning Functions to the Auxiliary Output Ports.)
When the signal is applied to one of the PF [AUX Out 1 Off] - PF [AUX Out 6 Off] input ports, the function
AUX I/O 1 Off
assigned to the Auxiliary I/O port is deactivated.
-
You can assign the function when "Selectable" is configured to the Auxiliary I/O ports 1 to 6.
AUX I/O 6 Off
Assigning Functions to the Auxiliary Output Ports.)
When the signal is applied to one of the PF [AUX Out 1 On] - PF [AUX Out 5 On] input ports, the function
AUX Out 1 On
assigned to the Auxiliary Output port is activated.
-
You can assign this function when "Selectable" is configure to the Auxiliary Output ports 1 to 5.
AUX Out 5 On
6-7 Assigning Functions to the Auxiliary Output Ports.)
When the signal is applied to one of the PF [AUX I/O 1 On] - PF [AUX I/O 6 On] input ports, the function
AUX I/O 1 On
assigned to the Auxiliary I/O port is disabled.
-
You can assign the function when "Selectable" is configured to the Auxiliary I/O ports 1 to 6.
AUX I/O 6 On
Assigning Functions to the Auxiliary Output Ports.)
Switch enable/disable the function assigned to the Auxiliary Output port when the signal is applied to one of the
AUX Out 1 On/Off
PF [AUX Out 1 On/Off] to PF [AUX Out 5 On/Off] input ports.
-
You can assign this function when "Selectable" is configure to the Auxiliary Output ports 1 to 5.
AUX Out 5 On/Off
6-7 Assigning Functions to the Auxiliary Output Ports.)
49
Default Level
Note: Although TKR-750/850/751/851 performs the detection
" 1st, 2nd, 3rd (AUX Input)
You can assign three functions (1st, 2nd, and 3rd) to
the AUX Input port and the AUX Input/Output port.
Select the functions from the dropdown list.
Default
Note:
! As for the AUX Input/Output port, it appears on the list only
! It cannot configure any functions to "2nd" and "3rd" when
Table 6-6 Assigning Functions to the Auxiliary Input Ports
Description
Field Programming Reference (FPRG)
when the detection is enabled, it performs Start Up first
when Start Up is enabled when the "Level" is selected.
(Refer to 6.4.3 Others Tab (Optional Features).)
Refer to Table 6-6 Assigning Functions to the
Range
Auxiliary Input Ports.
1st: None
2nd: Cannot be configured.
3rd: Cannot be configured.
when it is configured as the "AUX Input" port in the "AUX
Select" tab. (Refer to 6.10.1 AUX Select Tab.)
"1st" is configured as "None", and it cannot configure any
functions to "3rd" when "2nd" is configured to "None".
(Functions in GLAY are available only
when Down Edge is detected.)
(Refer to Table
(Refer to Table 6-7
(Refer to Table
(Refer to Table 6-7
(Refer to Table
Version: 1.01