Kenwood TKR-750 Programming Reference Manual page 43

Function Name
Multi-table It can toggle between Main and Sub for the signalling specified by the Multi-table Select by pressing the PF
Main/Sub key.
QT/DQT Decode
It can disable/enable QT/DQT Decode function by pressing the PF key.
Disable/Enable
QT/DQT Encode
It can disable/enable QT/DQT Encode function by pressing the PF key.
Disable/Enable
It can disable/enable the repeat operation by pressing the PF key.
Repeat Disable/Enable
It does not allow to configure this function if no channel is configured to the repeat operation.
Reset The operation of the TKR-750/850/751/851 is reset and it returns to the default when pressing the PF key.
Scan On/Off It can enable/disable the Scan function by pressing the PF [Scan On/Off] key.
Scrambler On/Off It can enable/disable Scrambler by pressing the PF [Scrambler On/Off] key.
Squelch On/Off It can disable/enable Squelch by pressing the PF [Squelch On/Off] key.
Squelch Momentary It can disable Squelch while pressing the PF [Squelch Momentary] key.
Take Over On/Off *1 It can enable/disable the control from an external device by pressing the PF [Take Over On/Off] key.
Test Tone On/Off It can enable/disable Test Tone function by pressing the PF [Test Tone On/Off] key.
TOT Disable/Enable It can enable/disable Time-out Timer by pressing the PF [TOT Disable/Enable] key.
TX Disable/Enable It can restrict/permit all transmissions by pressing the PF [TX Disable/Enable] key.
*1: When the control from the external device is enabled by pressing the PF [Take Over On/Off] key, you cannot control the external Monitor, the
external PTT, the Auxiliary Input port, and the Auxiliary I/O (In) port. However, the Auxiliary Out port and the Auxiliary I/O (Out) port works.
Note: The level detection for the auxiliary input port is performed
even if the PF key is pressed during the detection when the
Auxiliary input port is active. In this case, the Key Input Error
Tone sounds and the function assigned to the PF key does
not operate. (Refer to FUNC 9 Tone,
AUX Tab. )
Version: 1.01
(Refer to 6.10.1 AUX Select Tab.)
Refer to Table 6.10.2
Field Programming Reference (FPRG)
Description
6 EDIT MENU
38