Cw Id Window; Cw Id; Tx Interval Time; Tx Delay Time - Kenwood TKR-750 Programming Reference Manual

6 EDIT MENU
6.3

CW ID Window

It can configure a CW ID to send.
Figure 6-7 CW ID window
6.3.1

CW ID

It can configure a CW ID by entering a maximum of 32
characters and symbols. (Refer to 6.3 CW ID Window.)
A maximum of 32 characters and symbols
(space), ", ', (,), +,,, -,., /, 0, 1, 2, 3, 4, 5, 6, 7, 8,
Range
9,:, =,?
A - Z
Default Blank
6.3.2

TX Interval Time

It can configure the interval time to transmit the CW ID.
You can configure a duration using the spin buttons or
directly enter a value to configure the duration.
Range 1 - 60 min.
In steps of 1 min.
Default 30 min.
Note: The TX Interval Time starts counting down when resetting
the TKR-750/850/751/851, changing the channel, and
activating the "CW ID On" Function or the "Scan Off"
Function.
6.3.3

TX Delay Time

TX Delay Time is a duration between the time when the
transmission ends due to the expiration of the TX Interval
Time, the change of the channel, or the deactivation of
the CW ID Override function and the time when the TKR-
750/850/751/851 resumes transmitting in order to send
the CW ID. You can configure the duration using the spin
buttons or directly enter the value.
Interval Time.)
25
(Refer to 6.3.2 TX
Field Programming Reference (FPRG)
The CW ID is sent after the CW Mod. Delay Time is
expired. (Refer to 6.3.5 CW Mod. Delay Time.)
Range Off, 0.1 - 10 sec.
In steps of 0.1 sec.
Default 5 sec.
Note: "TX Delay Time" function is not applicable when sending the
CW ID with the "CW ID On" function.
6.3.4

CW Speed

It can configure a interval duration to send the CW ID.
You can configure the speed using the spin buttons or
directly enter the value.
Range 5 - 30 word/min.
In steps of 1 word/min.
Default 20 word/min.
6.3.5

CW Mod. Delay Time

It can configure a duration between the time when the
TKR-750/850/751/851 starts transmitting and the time
when it sends a CW ID. You can configure the duration
using the spin buttons or directly enter the value.
Range Off, 10 - 2550 ms
In steps of 10 ms
Default 600 ms
6.3.6

Audio Frequency

It can configure a frequency to send the CW ID. You can
configure the frequency using the spin buttons or directly
enter the value to configure the duration.
Range 400 - 2000 Hz
In steps of 100 Hz
Default 800 Hz
Version: 1.01