Kenwood TKR-750 Programming Reference Manual page 37

" Power On Tone
This allows to emits the Power On Tone when the
TKR-750/850/751/851 is turned ON.
Checked The Power On Tone sounds.
Range
Unchecked The Power On Tone does not sound.
Default Checked
" Warning Alert Tone
This allows to emit the Warning Tone.
(Refer to " Time-out Timer (TOT) (Local Mic PTT), "
TOT Rekey Time (Local Mic PTT), " Busy Channel
Lockout.)
There are three Warning Tones.
• Warning Alert Tone
This tone sounds when pressing the
PTT switch even after the Time-out
Timer of the Local Mic PTT expires
or while the Rekey Time is
activated.
Checked • TOT Pre-alert Tone
Range
This tone sounds when the Time-
out Timer is about to expire.
• TOT Pre-alert Tone
This tone sounds when the
transmission is disabled while the
Busy Channel Lockout function is
enabled.
Unchecked Not emit the Warning Alert Tone.
Default Checked
" Control Tone
This allows to emit the Control Tone when a PF key is
pressed.
There are four Control Tones.
•
•
Checked
Range
•
•
Unchecked Not emit the Control Tone.
Default Checked
" Backup Battery Warning Tone
Version: 1.01
Key Press Tone (A)
This tone sounds when the
assigned function is enabled by
pressing the PF key.
Key Press Tone (B)
This tone sounds when the
assigned function is disabled by
pressing the PF key.
Key Input Error Tone
This tone sounds when the
operation of the PF key is
denied.
Roll Over Tone
This tone sounds when selecting
the last channel by the PF key.
Field Programming Reference (FPRG)
This allows to emit the Backup Battery Warning Tone
when the power is switched to the backup power.
Emits the Backup Battery Warning
Checked Tone for 5 seconds when the power
is switched to the backup battery.
Range
Not emit the Backup Battery
Unchecked Warning Tone even when the power
is switched to the backup battery.
Default Unchecked
" Backup Battery Warning Tone Frequency
This is a frequency of the Backup Battery Warning
Tone. Configure the frequency by the spin buttons or
directly enter the value.
Warning Tone.)
Range 300 - 3000 Hz
In steps of 10 Hz
Default 1630 Hz
Note: You can configure the frequency of the Backup Battery
Warning Tone only when the Backup Battery Warning
Tone is enabled.
" Backup Battery Warning Tone Send to RA
This function allows to emit the Backup Battery
Warning Tone from the front speaker (RA output).
The dispatcher and operator can be aware it is
operating with backup power.
Battery Warning Tone.)
Emits the Backup Battery Warning
Checked Tone from the front speaker and send
to RA.
Range
Not emit the Backup Battery Warning
Unchecked
Tone.
Default Unchecked
Note: You can configure this function only when the Backup
Battery Warning Tone is enabled.
" Backup Battery Operation Tone
This is a tone sounded during transmitting by the
Repeater PTT, the External PTT, or the Local Mic PTT
with the backup battery.
Emits the Backup Battery Operation
Checked
Tone.
Range
Not emit the Backup Battery
Unchecked
Operation Tone.
Default Unchecked
" Backup Battery Operation Tone Frequency
This is a frequency of the Backup Battery Operation
Tone. Configure a frequency by the spin buttons or
6 EDIT MENU
(Refer to " Backup Battery
(Refer to " Backup
32