Kenwood TKR-750 Programming Reference Manual page 51

" Deactivation (AUX Input)
This is a standby Air Remote code to be decoded in
order to deavtivate the assigned function for the
Auxiliary Input port. From the dropdown list, you can
select a table number on the "Decode" tab from
"Encode/ Decode" table window.
"Encode/Decode Table" Window.)
When no function is assigned to "Function", you can
perform the encode function by interlocking with the
sensor input of the external device. You can select the
table number configured with the "Encode" tab on the
"Encode/Decode Table" window from the dropdown
list. (Refer to 6.8 "Encode/Decode Table" Window.)
None, Dec. Table 1 - 40,
Range
Enc Table 1 - 32
Default None
Note:
! You cannot configure "Deactivation"to the functions that you
cannot disable, such as the Channel Up function.
! When Dec. Table is already used to the other function, you
cannot configure the same Dec. Table.
" Transponder (AUX Input)
This is a timing to send the Transpond code. Select
one of "None", "Fore", "After" and "Both" from the
dropdown list.
None Not send the Transpond code.
Sends the Transpond code when
Fore
receiving the Air Remote code.
Sends the Transpond code after
Range
After processing the received Air Remote
code.
Sends the Transpond code when
Both receiving the Air Remote code and after
processing the received code.
Default None
Note:
! You cannot configure "Transponder" if no function is assign
(Refer to " Function (AUX Input).)
to "Function".
! You may not be allowed to select "After" or "Both" due to the
assigned functions to the Auxiliary Input port. (Example:
Reset, CW ID On) (Refer to 6.5 Key Assignment Window.)
Version: 1.01
(Refer to 6.8
Field Programming Reference (FPRG)
" Function (AUX Output)
The function assigned on the "Aux Output" tab of the
"Function Port" window appears. However, you cannot
change the configuration in this window.
6.10.2 AUX Tab.)
" Activation (AUX Output)
This is an Air Remote code when the function
assigned to the Auxiliary Output port activates.
When no function is assigned to "Function" (None),
you can control external devices by specifying the
decode code. Select the table number configured on
the "Decode" tab of the "Encode/Decode Table"
window from the dropdown list.
Decode Table" Window.)
Range None, Dec. Table 1 - 40, Enc Table 1 - 32
Default None
Note:
! You cannot use the TX Unlock and TXS with Air Remote.
(Refer to 6.10 Function Port Window.)
! Although you can use RF Power Down Detect with Air-
Remote, the Air Remote code is transmitted with the low
transmission power. (Refer to 6.10 Function Port Window.)
! When Dec. Table is already used to the other function, you
cannot configure the same Dec. Table.
" Deactivation (AUX Output)
This is an Air Remote code when the function
assigned to the Auxiliary Output port deactivates.
When no function is assigned to "Function" (None),
you can control external devices by specifying the
decode code. Select the table number configured on
the "Decode" tab of the "Encode/Decode Table"
window from the dropdown list.
Decode Table" Window.)
Range None, Dec. Table 1 - 40, Enc Table 1 - 32
Default None
Note:
! You cannot use TX Unlock and TXS with the Air Remote.
(Refer to 6.10 Function Port Window.)
! When Dec. Table is already used to the other functions, you
cannot configure the same Dec. Table.
6 EDIT MENU
(Refer to
(Refer to 6.8 "Encode/
(Refer to 6.8 "Encode/
46