Dropout Delay Time; Dwell Time; Off-Hook Scan - Kenwood TKR-750 Programming Reference Manual

Table 6-4 Revert Channel Configuration
Function
The revert channel is assigned to the last
channel that is received signal and stopped
scanning during scanning and transmit on it.
In case of pausing the scan due to changing
Last Called channel by PF key, it transmits on that
channel.
During pausing scan due to receiving signal,
It is assigned as the revert channel, and
transmits on it.
The revert channel is assigned to the last
channel that is transmitted during scanning.
In case of pausing the scan due to changing
Last Used channel by PF key, it transmits on that
channel.
While receiving a signal, It transmits on the
revert channel.
The revert channel is assigned to the last
selected channel.
In case of pausing the scan due to changing
Selected channel by PF key, it is assigned as the
revert channel and transmit on it.
While receiving a signal, it changes to the
revert channel and transmit.
The revert channel is assigned to the last
selected channel and transmit on it during
scan.
In case of pausing scan due to changing
Selected + Talk
Back channel by PF key, it transmits on that
channel.
While receiving a signal, It transmits on the
current channel.
The revert channel is assigned to the priority
channel and transmit on it during scan.
Even when pausing scan due to selecting
Priority
channel by PF key or receiving a signal
during scan, it transmits on the priority
channel.
The revert channel is assigned to the priority
channel and transmit on it during scan.
In case of pausing scan due to changing
Priority + Talk
channel by PF key, it transmits on that
Back
channel.
While receiving a signal, It transmits on the
current channel.
Note: You are able to configure the channel used for the repeat
operation as a Priority Channel.
Channel.)
Although TKR-750/850/751/851 performs the repeat
operation on the Priority Channel when receiving a call on
the Priority Channel, it transmits with the channel matching
the conditions configured in the Revert Channel function
when receiving the transmission request having higher
priority than the transmission with the repeater PTT.
6.6.6

Dropout Delay Time

This is a duration time that TKR-750/850/751/851
automatically resumes the Scan after the receiving signal
is disappear.
Version: 1.01
Description
(Refer to 6.6.2 Priority
Field Programming Reference (FPRG)
Configure the duration by the spin buttons or directly
enter the value to configure the duration.
TKR-750/850/751/851 to resume scanning with the
following conditions.
• There is no signal to receive.
• The received QT/DQT code becomes un-match.
Range 0.5 - 5.0 sec.
In steps of 0.5 sec.
Default 3.0 sec.
6.6.7

Dwell Time

This is a duration to resume scanning after stop
transmitting.
TKR-750/850/751/851 pauses scanning if the PTT switch
is pressed to transmit during the scan and resumes
scanning after the transmission ends. Configure the
duration by the spin buttons or directly enter the value to
configure the duration.
Range 0.5 - 5.0 sec.
In steps of 0.5 sec.
Default 3.0 sec.
6.6.8

Off-hook Scan

It can enable/disable the Off-hook Scan. TKR-750/850/
751/851 activates the Scan function regardless of the
local microphone position when this function is enabled.
Scanning regardless of the local
Checked
microphone position.
Range
Scanning only when the local
Unchecked
microphone is in On-hook position.
Default Checked
Note: TKR-750/850/751/851 continues scanning without pausing
on the revert channel when receiving the transmission
command with the TX Disable function. When the Off-hook
Scan function is disabled, it moves to the revert channel.
(Refer to 6.10 Function Port Window.)
6 EDIT MENU
40