Others Tab (Optional Features) - Kenwood TKR-750 Programming Reference Manual

6.4.3

Others Tab (Optional Features)

On this tab, you can activate/deactivate Power Saver
Mode and switch the power source, and configure the
functions activating when the TKR-750/850/751/851 is
turned ON.
You can configure the Save On/Off, the Start Up
operation, the "Backup Power Function", and the "Main
Power Function".
Function Name
None The TKR-750/850/751/851 does not perform any operation.
AUX Out 1 Off The function assigned to the specified Auxiliary Output port is disabled when the TKR-750/850/751/851 starts
- operation. You can assign this function when "Selectable" is configure to the Auxiliary Output ports 1 - 5.
AUX Out 5 Off (Refer to Table 6-7 Assigning Functions to the Auxiliary Output Ports.)
AUX I/O 1 Off The function assigned to the specified Auxiliary I/O port is disabled when the TKR-750/850/751/851 starts
- operation. You can assign the function when "Selectable" is configured to the Auxiliary I/O ports 1 - 6.
AUX I/O 6 Off (Refer to Table 6-7 Assigning Functions to the Auxiliary Output Ports.)
AUX Out 1 On The function assigned to the specified Auxiliary Output port is enabled when the TKR-750/850/751/851 starts
- operation. You can assign this function when "Selectable" is configure to the Auxiliary Output ports 1 - 5.
AUX Out 5 On (Refer to Table 6-7 Assigning Functions to the Auxiliary Output Ports.)
AUX I/O 1 On The function assigned to the specified Auxiliary I/O port is enabled when the TKR-750/850/751/851 starts operation.
- You can assign the function when "Selectable" is configured to the Auxiliary I/O ports 1 - 6.
AUX I/O 6 On (Refer to Table 6-7 Assigning Functions to the Auxiliary Output Ports.)
The TKR-750/850/751/851 moves to the channel selected from CH 1 to CH 16.
Channel 1
You cannot configure this function when "Channel Select" is configured to Auxiliary I/O ports 1 - 4. "E2" appears on
-
the display when specifying the channel without data.
Channel 16
(Refer to Table 6-7 Assigning Functions to the Auxiliary Output Ports.)
The TKR-750/850/751/851 moves to the next lower channel.
Channel Down
The channel without data is skipped.
The TKR-750/850/751/851 moves to the next higher channel.
Channel Up
The channel without data is skipped.
The TKR-750/850/751/851 sends the CW ID when it starts operation.
CW ID On
This function is available on the channel having the CW ID.
CW Message 1
The TKR-750/850/751/851 sends the assigned CW ID from CW Messages 1 to 8 when it starts operation.
-
6.12 CW Message Window.)
CW Message 8
DC Power Save The TKR-750/850/751/851 exits Power Saver Mode when it starts operation. You cannot configure this function to
Off the Save On/Off function.
DC Power Save The TKR-750/850/751/851 enters Power Saver Mode when it starts operation. You cannot configure this function to
On the Save On/Off function.
All LEDs other than the Power SW LED that is located on the front panel unlit.
Display Off
This function can be enabled only when the TKR-750/850/751/851 is in Power Saver Mode.
All LEDs on the front panel light.
Display On
This function can be enabled only when the TKR-750/850/751/851 is in Power Saver Mode.
The TKR-750/850/751/851 disables the Repeat Hold Time.
Hold Time
You can configure this function only when at least one channel is configured as the Repeat for Operation mode and
Disable
the Repeat Hold Time is enabled.
Version: 1.01
Description
(Refer to 6.4.1 Optional Features 1 Tab.)
Field Programming Reference (FPRG)
6 EDIT MENU
Figure 6-11 Others tab
Table 6-2 Available functions
(Refer to 6.3 CW ID Window.)
(Refer to
34