Aux Input/Output Tab - Kenwood TKR-750 Programming Reference Manual

6 EDIT MENU
" Activation (PF Key Transponder)
This is a Transpond code that is sent when the
function assigned to AUX In/Out activates with the Air
Remote function and "Transponder" is configured as
(Refer to " Transponder (PF Key).)
"Yes".
From the dropdown list, you can select a table number
in the "Decode" tab from "Encode/Decode" table
window. (Refer to 6.8 "Encode/Decode Table"
Window.)
Range None, Enc. Table 1 - 32
Default None
Note: You can use Single Tone as the Transpond code when
the DTMF signalling is configured.
Tone (PF Key Transponder).)
" Deactivation (PF Key Transponder)
This is a Transpond code when the function assigned
to Aux In/Out deactivates with the Air Remote function
and "Transponder" is configured as "Yes".
Transponder (PF Key).)
From the dropdown list, you can select a table number
in the "Decode" tab from "Encode/ Decode" table
window. (Refer to 6.8 "Encode/Decode Table"
Window.)
Range None, Enc Table 1 - 32
Default None
Note: You can use Single Tone as the Transpond code when
the DTMF signalling is configured.
Tone (PF Key Transponder).)
" Single Tone (PF Key Transponder)
It can use a Single Tone for the Transpond code. You
can configure this function only when the DTMF
signalling is used.
Uses Single Tone for the Transpond
Checked
code.
Range
Not use Single Tone for the
Unchecked
Transpond code.
Default Unchecked
Note: You cannot individually select Single Tone for Aux
Transponder Activation and Deactivation.
45

6.9.2 AUX Input/Output Tab

On this tab, it can control the function assigned to the
Auxiliary Port by the Air Remote code.
(Refer to " Single
" Function (AUX Input)
(Refer to "
" Activation (AUX Input)
(Refer to " Single
Field Programming Reference (FPRG)
Figure 6-18 AUX Input/Output tab
The function assigned on the "Aux Input" tab of the
"Function Port" window appears. However, you cannot
change the configuration in this window.
6.10.2 AUX Tab.)
Although you can configure three functions (1st, 2nd,
and 3rd) to the Auxiliary Input port, it is possible
activate only the function configured to the 1st
with the Air Remote function.
Port Window.)
this is a standby Air Remote code to be decoded in
order to activate the assigned function for the Auxiliary
Input port. From the dropdown list, you can select a
table number on the "Decode" tab from "Encode/
Decode" table window. (Refer to 6.8 "Encode/Decode
Table" Window.)
When no function is assigned to "Function" (None), It
can perform the encode function by interlocking with
the sensor input of the external device. From the
dropdown list, you can select a table number on the
"Decode" tab from "Encode/ Decode" table window.
(Refer to 6.8 "Encode/Decode Table" Window.)
Range None, Dec. Table 1 - 40, Enc Table 1 - 32
Default None
Note: When Dec. Table is already used for the other function,
it does not allow to configure the same Dec. Table.
(Refer to
(Refer to 6.10 Function
Version: 1.01