Ch Paste Button; Embedded Message Window - Kenwood TKR-750 Programming Reference Manual

6 EDIT MENU
Reception Frequency
Channel No.
[MHz]
7 170.10000
8 158.50000
9 161.50000
10 136.10000
11 151.90000
12 152.10000
13 -
14 -
15 -
16 -
Table 6-10 Default Test Frequency of the TKR-850/851 (K)
Reception Frequency
Channel No.
[MHz]
1 450.10000
2 465.10000
3 479.90000
4 455.10000
5 460.10000
6 470.10000
7 475.10000
8 462.60000
9 467.60000
10 440.10000
11 459.90000
12 -
13 -
14 -
15 -
16 -
Note:
! It must configure both of the "Reception" frequency and the
"Transmission" frequency.
! The default frequency is configured when all frequencies are
deleted.
! Refer to the Service Manual for checking how to test the TKR-
750/850/751/851.
! 406.0 MHz and 406.1 MHz are assigned as the Emergency
locator beacons in the United States. Therefore, it does not allow
designed to use these frequencies.
57

6.13.2 CH Paste Button

Transmission
Frequency [MHz]
Click "CH Paste" to copy the frequency configured in the
170.00000
"Channel Information" window to each channel in the
161.50000
"Test Frequency" window.
158.50000
Note:
136.00000
! You can view the context menu of the selected channel by right-
151.95000
152.00000
! The default frequency is configured when all frequencies are
-
-
-
-

6.14 Embedded Message Window

Transmission
It can configure the message that is stored in the TKR-
Frequency [MHz]
750/850/751/851 on the "Embedded Message" window. It
450.00000
can store a message with up to 64 characters
(combination of alphabets and numerals). It can embed
465.00000
the specific information, such as the control number or
480.00000
the name of the configuration data written.
455.00000
The Embedded Message appears on the "Open" window
460.00000
when the configuration data is opened.
Open.)
470.00000
475.00000
462.50000
467.50000
440.00000
460.00000
-
-
-
Directly enter the message in the edit box.
-
-
Field Programming Reference (FPRG)
clicking the channel number. In this window, you can copy or
delete the configuration data.
deleted.
Figure 6-23 "Embedded Message" window
Range Maximum of 64 characters and symbols
Default Blank
(Refer to 4.2
Version: 1.01