Siemens SIMATIC Ident Function Manual page 46

Configuring the instructions
4.5 Programming add-on instructions
Table 4- 27 ATTRIBUTE "0x89" (data type "IID_READSTAT_89_RF68xR") compatible with RF68xR
Name
status info
hardware version
firmware version
config ID
inventory_status
sum of filtered tags
filtered smoothing
filtered blacklist
filtered data-filter
filtered RSSI threshold
filtered RSSI delta
Table 4- 28 ATTRIBUTE "0x87" (data type "IID_READSTAT_87_RF600")
Name
status info
hardware
hardware version
reserved0
firmware
firmware version HB
firmware version LB
driver
current_time_hour
current time min
current time sec
reserved1
SLG version
baud
reserved2
distance limiting SLG
multitag SLG
field ON control SLG
field ON time SLG
expert mode
status_ant
scanning_time_SLG
MDS control
The internal time stamp of the reader that relates to this event is output. The internal reader time stamp is not synchro-
1)
nized with UTC.
The antenna status relates to the "ATTRIBUTE" (bits 0 and 1) of the last executed "SET-ANT" or to the default value set
2)
by "INIT"/"WRITE-CONFIG". With "INIT"/"WRITE-CONFIG" of the RF620R, the default value is "1" (int. antenna on),
with the RF630R, it is "3" (antennas 1 and 2 on).
46
Type Comment
SINT SLG status mode(Subcommand)
SINT Version of hardware
SINT[4] Version of firmware
DINT Unix timestamp
INT 0=inventory not active; 1=inventory active; 2=presence
mode active
INT All filtered Tags
INT Filtered Tags trough Smoothing
INT Filtered Tags trough Blacklist
INT Filtered Tags trough Data-Filter
INT Filtered Tags trough RSSI Threshold
INT Filtered Tags trough RSSI Delta
Type Comment
SINT SLG status mode
SINT Type of hardware
INT Version of hardware
INT
SINT Type of firmware
SINT Version of firmware highbyte
SINT Version of firmware lowbyte
SINT Type of driver
SINT
Hours
SINT Minutes
SINT Seconds
SINT
SINT SLG version
SINT Baudrate
SINT
SINT Selected transmit power
SINT Multitag SLG
SINT Selected comunication typ
SINT Selected channel
SINT Expert mode
SINT
Status of antenna
SINT Radio communication profile (country specific radio
standart)
SINT Presence mode
1)
2)
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03