Siemens SIMATIC Ident Function Manual page 47

Table 4- 29 ATTRIBUTE "0x88" (data type "IID_READSTAT_88_RF600")
Name
status info
hardware
hardware version
reserved word1
firmware
firmware version HB
firmware version LB
driver
current_time_hour
current_time_minute
current_time_sec
current_time_reservByte
SLG version
baud
reserved byte1
distance limiting SLG
multitag SLG
field ON control SLG
field ON time SLG
expert mode
status_ant
scanning_time_SLG
MDS control
blink pattern
act algor Single Tag
act algor ITF Phase2
act algor ITF Phase1
act algor Smoothing
act algor Blacklist
act algor RSSI Threshold
act algor Power Ramp
act algor Power Gap
Reserved1
Reserved2
Reserved3
Reserved4
act algor EPC MemBankFilter
act algor Tag Holg
act algor Multi Tag
act algor ISTM
reserved word2
reserved word3
reserved word4
filtered max rssi
reserved byte2
filtered tags rssi
reserved byte3
filtered tags black list
filtered tags epc data
filtered tags smoothing
itf ph1 max detect
itf ph1 tags detect
itf ph2 max detect
itf ph2 tags detect
filtered_istm_min_dist
filtered istm tags
last error
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03
Type Comment
SINT SLG status mode(Subcommand)
SINT Type of hardware
INT Version of hardware
INT Reserved
SINT Type of firmware
SINT Version of firmware (High-Byte)
SINT Version of firmware (Low-Byte)
SINT Type of driver
SINT
Hours
SINT
Minutes
SINT
Seconds
SINT
SINT SLG-Version
SINT Baudrate
SINT Reserved
SINT Selected transmit power
SINT Multitag SLG
SINT Selected communication type
SINT Selected channel
SINT Expert mode
SINT
Status of antenna
SINT Radio communication profile (country specific radio
standart)
SINT Presence mode
SINT Blink Pattern
Bool Single Tag [1]
Bool ITF Phase2 [2]
Bool ITF Phase1 [3]
Bool Smoothing [4]
Bool Blacklist [5]
Bool RSSI Threshold [6]
Bool Power Ramp [7]
Bool Power Gap [8]
Bool Reserved1 [1]
Bool Reserved2 [2]
Bool Reserved3 [3]
Bool Reserved4 [4]
Bool EPC MemBankFilteres [5]
Bool Tag Hold [6]
Bool Multi Tag [7]
Bool ISTM [8]
INT Reserved
INT Reserved
INT Reserved
SINT Maximum RSSI value of a tag, of all filtered tags
SINT Reserved
SINT Number of tags, filtered out by the RSSI threshold
SINT Reserved
INT Number of tags, filtered out via Black-List
INT Number of tags, filtered out via EPC Data Filter
INT Number of tags in Tag List of status Not-Observed
INT Number of reads of a Tag, filtered out via ITF-phase 1
INT Number of tags, filtered out via ITF-phase 1
INT Number of reads of a Tag, filtered out via ITF-phase 2
INT Number of tags, filtered out via ITF-phase 2
INT Minimum distance of tags according to sorting criterion
of ISTM
INT Number of tags, filtered out via ISTM algorithm
SINT error code of the last occuring error (last command)
4.5 Programming add-on instructions
1)
1)
1)
2)
Configuring the instructions
47