Siemens SIMATIC Ident Function Manual page 97

System
Address space of the transponder versions for RF300
System
RF300
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03
Addressing
Start address
Length
Addressing
R/W or OTP memory (EEPROM)
(The EEPROM user memory for RF300 can be used either as R/W memory or as an
OTP memory (see RF300 system manual))
Start address
End address
ID-Nr.: (fixed-coded; can only be output as a whole)
Start address
Length
R/W or OTP memory (EEPROM)
(The EEPROM user memory for RF300 can be used either as R/W memory or as an
OTP memory (see RF300 system manual))
Start address
End address
R/W memory (FRAM)
Start address
End address
Id-Nr.: (fixed-coded, can only be read out as a whole)
Start address
Length
32 KB data memory (FRAM/EEPROM)
R/W or OTP memory (EEPROM)
(The EEPROM user memory for RF300 can be used either as R/W memory or as an
OTP memory (see RF300 system manual))
Start address
End address
R/W memory (FRAM)
Start address
End address
ID-Nr.: (fixed-coded; can only be output as a whole)
Start address
Length
64 KB data memory (FRAM/EEPROM)
R/W or OTP memory (EEPROM)
(The EEPROM user memory for RF300 can be used either as R/W memory or as an
OTP memory (see RF300 system manual))
20 bytes of data memory (EEPROM)
8 KB data memory (FRAM/EEPROM)
Configuring the instructions
4.8 Transponder addressing
16-bit hexadecimal number
0xFFF0
0x0008
16-bit hexadecimal number
0xFF00
0xFF13
0xFFF0
0x0008
0xFF00
0xFF13
0x0000
0x1FFC
0xFFF0
0x0008
0xFF00
0xFF13
0x0000
0x7FFC
0xFFF0
0x0008
97