Ordinary Functions And Special Functions Of Machine Monitor - Komatsu PC210-8 Shop Manual

UEN00229-01
t

Ordinary functions and special functions of machine monitor

The machine monitor has the ordinary function and special functions and displays information of various
types on the multi-display.
Some items are displayed automatically according to the internal setting of the machine monitor and the oth-
ers are displayed according to the operation of the switches.
1. Ordinary functions: Operator mode
The items in this mode are displayed ordinarily. The operator can display and set them by operating the
switches (Display and setting of some items need special operations of the switches).
2. Special functions: Service mode
The items in this mode are not displayed ordinarily. Each serviceman can display them by operating the
switches specially. This mode is used for special setting, testing, adjusting, or troubleshooting.
t Operator mode (Outline)
A Display of KOMATSU logo
A Display of inputting password
A Display of check of breaker mode
A Display of check before starting
A Display of warning after check before starting
A Display of ending of maintenance interval
A Display of check of working mode and travel speed
A Display of ordinary screen
A Display of end screen
B Selection of auto-deceleration
B Selection of working mode
B Selection of travel speed
B Operation to stop alarm buzzer
B Operation of windshield wiper
B Operation of window washer
B Operation of air conditioner/heater
Operation to display camera mode
B
(if camera is installed)
B Operation to display clock and service meter
B [KOMTRAX message]
Setting and display of user mode
B
(Including KOMTRAX messages for user)
C Display of energy-saving guidance
C Display of caution monitor
C Display of automatic judgment of breaker
C Display of user code and failure code
O (Special operation)
Function of checking display of LCD
D
(Liquid Crystal Display)
D Function of checking service meter
Function of changing attachment/maintenance
D
password
4
Page
6p
6p Monitoring
7p Mechanical systems
Abnormality
7p Electrical systems
record
7p Air-conditioning system/Heater system
8p Maintenance record
8p Maintenance mode change
8p Phone number entry
8p Working mode with key ON
9p Setting of unit
9p With/Without attachment
Setting of attachment/maintenance
9p Default
password
10p Setting of camera
10p Setting of ECO display
11p Setting of automatic judgment of breaker 44p
11p Pump absorption torque (F)
11p Pump absorption torque (R)
Adjustment
12p Setting of travel Lo speed
Adjustment of flow to attachment in
12p
compound operation
15p Reduced cylinder mode operation
No-injection cranking
15p
Display of fuel consumption
15p Setting condition of terminal
Condition of positioning and
15p
Display of
communication
KOMTRAX
16p MODEM S/N (Model TH300)
16p MODEM IP address (Model TH200)
Display of KOMTRAX message
18p
18p
19p
30 Testing and adjusting
Service mode
PC210, 230, 240-8
Page
21p
22p
26p
27p
33p
34p
35p
37p
38p
39p
40p
41p
42p
43p
45p
46p
47p
48p
49p
50p
52p
53p
54p
55p
56p
57p