Axis Configuration - Siemens SINUMERIK 840DE sl Function Manual

● MD2xxxx $MC_TRANSMIT_BASE_TOOL_<n> (vector of the base tool)
● MD2xxxx $MC_TRANSMIT_POLE_SIDE_FIX_<n> (limitation of the working area in front of/
behind the pole)
where <n> = 1, 2 (TRANSMIT data set number)
2.1.2.2

Axis configuration

The following shows an axis configuration that is typical of TRANSMIT.
①
Machine axis name
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 0 ] = "CM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 1 ] = "XM"
Transformations
Function Manual, 06/2019, A5E47435470B AA
Effective if TRANSMIT is active.
M1: Kinematics transformation
2.1 TRANSMIT face end transformation (option)
29