Examples; Machining Grooves On A Cylinder Surface With X-Y-Z-C Kinematics - Siemens SINUMERIK 840DE sl Function Manual

M1: Kinematics transformation
2.2 TRACYL cylinder surface transformation (option)
2.2.5

Examples

2.2.5.1

Machining grooves on a cylinder surface with X-Y-Z-C kinematics

The example refers to the turning machine with an additional Y axis drawn in the following
figure.
XM
YM
ZM
CM
ASM Main spindle
Parameter assignment
Machine axis name
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 0 ] = "CM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 1 ] = "XM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 2 ] = "YM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 3 ] = "ZM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 4 ] = "ASM"
Geometry axis names
● MD20060 $MC_AXCONF_GEOAX_NAME_TAB[ 0 ] = "X" (name of the 1st geometry axis)
● MD20060 $MC_AXCONF_GEOAX_NAME_TAB[ 1 ] = "Y" (name of the 2nd geometry axis)
● MD20060 $MC_AXCONF_GEOAX_NAME_TAB[ 2 ] = "Z" (name of the 3rd geometry axis)
58
Infeed axis, perpendicular to rotary axis
Additional axis
Axis is parallel to rotary axis
Rotary axis
Function Manual, 06/2019, A5E47435470B AA
Transformations