4. Take the stripping tool in your right
hand.
5. Place the cable on the measuring
template.
Use your left index finger as the
limit stop.
9. Remove the cable jacket, shield
and the white filler with your hand.
Passive network components
System Manual, 02/2013, C79000-G8976-C282-01
Instructions for fitting connectors, attachments and devices
6. Place the cable in the stripping tool.
The index finger of your left hand is
the limit stop.
7. Tighten the stripping tool.
10. Turn back the braid over the cable
jacket and secure it with the
supplied adhesive metallic cable
foil.
11. Remove the exposed foil shield and
white filler below it.
2.3 Electrical networks
8. To strip the insulation, turn the tool
in the direction of the arrow
–
approx. 4 times for PVC
insulation
–
approx. 8 times for PUR
insulation
12. Arrange the wires according their
colors:
–
a: yellow
–
b: orange
–
c: white
–
d: blue
13. Cut back the wires to a length of 15
mm.
17