Siemens 6GK1 901-1GB01 System Manual page 49

2. Cut the braided shield approximately 10 mm from the edge of the outer sheath
3. Turn back the braided shield over the outer sheath.
Passive network components
System Manual, 02/2013, C79000-G8976-C282-01
and pull off the loose shield.
10
– Unwind the aluminum foil shield up to a point approximately 15 mm from the folded
back braided shield and cut off the unwound material.
– Remove the plastic foil and blind elements.
– Remove approximately 5 mm of the insulation from the conductors.
5 10 15
Instructions for fitting connectors, attachments and devices
2.3 Electrical networks
49