ABB PST Series Installation And Commissioning Manual page 105

:RUG LQ LQSXW GDWD
DUHD
12
13
14
1SFC132003M0201
  'LDJQRVWLF LQSXWV
There are 3 channels available for fieldbus related
diagnostic messages. Each channel consists of two bytes
with an error code and the parameter number that caused
the error. The latest error is stored in channel 1, the
second latest in channel 2 and the third latest in channel
3. The binary output bit "reset active diagnostics" is used
to clear the diagnostic area.
Error Codes:
1 = Parameter Value out of range.
2 = Invalid parameter number.
3 = Write of parameter when fieldbus control is not
enabled.
'LDJQRVWLF LQSXW (UURU &RGH
ZRUG
0 Diagn. Channel 1, Error Code Diagn. Channel 1,
1 Diagn. Channel 2, Error Code Diagn. Channel 2,
2 Diagn. Channel 3, Error Code Diagn. Channel 3,
)LHOGEXV FRPPXQLFDWLRQ RSWLRQ
3DUDPHWHU QXPEHU
Parameter No
Parameter No
Parameter No
&KDSWHU 
105