ABB PST Series Installation And Commissioning Manual page 106

&KDSWHU 
)LHOGEXV FRPPXQLFDWLRQ RSWLRQ
:RUG LQ
RXWSXW GDWD
DUHD
0
106
  %LQDU\ RXWSXW WHOHJUDP
%LQDU\ %LW 'DWD
RXWSXW E\WH
0 0 Start (1
Seq.start)
1 Stop
2 Reset Events
3 Enable
4 Jog
5 DOL start
6 Start2 (2
Seq.start)
7 Start3 (3
Seq.start)
1 8 (0) Time synchronisation
9 (1) Reset active diagnostics
10 (2) Spare
11 (3) Spare
12 (4) Spare
13 (5) Spare
14 (6) Spare
15 (7) Spare
From PLC to Softstarter.
'HVFULSWLRQ
st
par set if Commence a start when signal is
set. Start1 if sequence start.
Commence a stop when signal is
negated.
Reset signal for possible events.
Enable, this bit must be set for run-
ning the motor.
Perform Jog when signal is set.
Perform DOL start when signal is
set.
nd
par set Start2 if sequence start.
rd
par set Start3 if sequence start.
Time synchronisation signal that is
used to synchronise the local real
time clock with the time given as an
analog input telegram to the soft-
starter. If the signal is "1" and there is
a difference between the times, the
local real time clock is synchronised.
When set to "1" this will reset the
fieldbus diagnostic area.
1SFC132003M0201