ABB PST Series Installation And Commissioning Manual page 74

&KDSWHU 
6HWWLQJV DQG FRQILJXUDWLRQ
74
.LFN 6WDUW
Activate the .LFN 6WDUW function by entering this menu.
Press 6WRUH to save the selection.
.LFN /HYHO
Set the required level of the Kick Start. Press 6WRUH to save
the data.
This menu will only be visual if Kick Start is activated.
.LFN 7LPH
Set the required time for the kick start. Press 6WRUH to save
the data.
This menu will only be visual if Kick Start is activated.
6WDUW 5DQJH
The ramp time for start can be set between 1 and 30
seconds as default. If required, the range can be extended
up to 120 seconds by entering this menu. Press 6WRUH to
save the data.
6WRS 5DQJH
The ramp time for stop can be set between 0 and 30
seconds as default. If required, the range can be extended
up to 120 seconds by entering this menu. Press 6WRUH to
save the data.
The configuration of the parameters in the Start/Stop
group is now completed. It is possible to return to top level
by pressing Back three times. To configure the protection,
proceed to that menu.
1SFC132003M0201