ABB PST Series Installation And Commissioning Manual page 48

&KDSWHU 
&RQQHFWLRQ
)LJXUH  )LHOGEXVSOXJ
)LJXUH  3ULQFLSOH RI D ILHOGEXV QHWZRUN ZLWK 367 VRIWVWDUWHUV FRQQHFWHG
48
  &RQQHFWLRQ RI FRPPXQLFDWLRQ
GHYLFHV RSWLRQDO
  )LHOGEXV FRPPXQLFDWLRQ
The fieldbus communication plug shall be connected to
the communication interface on the front of the PST, see
figure 26.
Make sure that the plug is in correct position and tighten
the screw with 0,8 Nm (7,1 lb in) and additional 1/4 turn.
For programming and other information, see Chapter 7
"Settings and configuration" and Chapter 8 "Fieldbus
communication (option)" .
1SFC132003M0201