Chapter 2 Configuring and Upgrading the System
5.3.1 Installing 2.5-inch Hard Disk Drive
Follow the procedure below to install the hard disk drives. Install the hard disk drives from a smaller slot number
to large number on CPU/IO module 0/1, from slot 0 to slot through slot 7.
1.
Shut down the OS.
The system turns off automatically.
2.
Remove the front bezel.
3.
Identify the slot to which you want to install a hard disk drive.
4.
If a dummy tray is inserted in a slot you want to install the hard disk drive, remove the dummy tray.
5.
Unlock the hard disk drive.
112
•
Important
Refer to Chapter 2 (5.1.2 Anti-static measures) and Chapter 2 (5.1.4 Preparing
your system for upgrade) before starting installing or removing options.
•
You must mount two HDDs that form dual disk configuration before starting the
OS.
Important
Keep and store the dummy tray for future use.
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
5. Installing Optional Devices