Removing 2.5-Inch Hard Disk Drive - NEC Express5800 Series Maintenance Manual

Chapter 2 Configuring and Upgrading the System

5.3.2 Removing 2.5-inch Hard Disk Drive

Follow the procedure below to remove the hard disk drive.
1. Shut down the OS.
The system turns off automatically.
2. Remove the front bezel.
3. Push the lever of the hard disk to unlock the
drive, and pull the handle toward you.
4. Hold the handle and hard disk drive to pull them
off.
5. Install the dummy tray in an empty tray
according to procedures described in Chapter 2
(5.3.1 Installing 2.5-inch Hard Disk Drive).
Ensure to install the dummy slot in the empty slot
to improve the cooling effect within the server.
114
Important
Refer to Chapter 2 (5.1.2 Anti-static measures) and Chapter 2 (5.1.4 Preparing your
system for upgrade) before starting installing or removing options.
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
5. Installing Optional Devices