Details Of Expressbuilder; Starting Expressbuilder; Menu - NEC Express5800 Series Maintenance Manual

Chapter 3 Useful Features
5.

Details of EXPRESSBUILDER

EXPRESSBUILDER helps you to install operating system and check the connection status of server.
EXPRESSBUILDER also provides bundled software and documents.
5.1

Starting EXPRESSBUILDER

EXPRESSBUILDER is stored in DVD provided with the server, and can be run in the following two ways.
•
Insert the DVD to the optical disk drive of the server, and then reboot by turning off and on the server or by
pressing Ctrl + Alt + Delete.
Boot Selection Menu shown in Chapter 3 (5.2 Menu) - (1) Boot Selection Menu) appears.
•
Insert the DVD into a computer on which Windows is running.
Autorun Menu shown in Chapter 3 (5.2 Menu) - (3) Autorun Menu appears.
5.2

Menu

EXPRESSBUILDER is operated by using onscreen menus.
(1)
Boot Selection Menu
When EXPRESSBUILDER starts from DVD, the following menu appears.
Use the upper and lower arrow keys to move the cursor, and then press Enter to select it.
If you select Tool menu, Tool Menu shown in (2) Tool Menu appears after selecting display language type.
Tips
Remove other removable media before starting EXPRESSBUILDER.
Boot selection
Os installation
Tool menu
Important Do NOT select [OS installation] when VMware is installed.
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
5. Details of EXPRESSBUILDER
187