Removing Pci Board - NEC Express5800 Series Maintenance Manual

Chapter 2 Configuring and Upgrading the System
12. Install the stopper and secure it with one screw.
13. Refer to Chapter 2 (5.4.2 Installing CPU/IO Module) and install the CPU/IO module.
14. Connect the power cords.
15. Press the POWER switch to power on the server.
16. Verify that POST displays no error message.
If POST displays an error message, write it down and see the POST error message list in Chapter 1
(6.2 POST Error Message).
17. After the OS has started, proceed to steps in Chapter 2 (5.7.5 Setup of Optional PCI Board).

5.7.3 Removing PCI Board

To remove PCI card card, follow the reverse procedure of the installation and install the slot cover.
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
5. Installing Optional Devices
143