Boot - NEC Express5800 Series Maintenance Manual

Chapter 3 Useful Features

1.2.5 Boot

If you move the cursor to Boot, the Boot menu where you can configure the boot order appears.
For details about the options, see the table below.
Option
Boot Configuration
Quiet Boot
Bootup NumLock State
Setup Prompt Timeout
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
CD/DVD ROM Drive BBS
Priorities
Floppy Drive BBS Priorities
Hard Drive BBS Priorities
Network Drive BBS Priorities
1. When BIOS detects a bootable device, information on the device is displayed in the designated area.
Parameter
–
Disabled
[Enabled]
On
[Off]
Number
–
–
–
–
–
–
–
–
–
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
Descriptions
–
Enable or disable the feature to display logo during
POST. When this option is set to Disabled, the results of
POST execution are displayed instead of the logo.
If BIOS Redirection Port is enabled, this option is
shown as Unavailable and inaccessible (run with
Disabled state automatically)
Enable or disable NumLock feature of keyboard.
Specify the time until the F2 is pressed to launch SETUP.
–
These items display the priority of boot devices.
Specify the boot priority for each BBS (BIOS Boot
Specification).
1. System BIOS
[ ]: Factory settings
165