Mitsubishi Electric AE-200A Instruction Book page 17

[4] [HWHP] display
Touch [Monitor/Operation] in the menu bar, and then touch [HWHP].
The operation status of each HWHP (CAHV) unit group will appear.
Note: The [Controller] setting will appear when the [System Exp] setting on the [Unit Info.] screen is set to [Expand]. Switch
the [Controller] setting between [AE200], [AE1], [AE2], and [AE3] to display the information for each AE-200 and AE-50
individually.
Controller
Select [AE200] to display the
information for AE-200, and
select [AE1], [AE2], or [AE3]
to display the information for
each AE-50.
Operation mode
Group icons
The icon indicates the
operation condition of the
group.
Group name
Set water temperature
Deselect-all
Select-all-groups
WT07190X01
17
Representative water
temperature
Outdoor temperature
Inlet water temperature
Outlet water temperature
Fan mode
Operate
Touch to display the
operation settings screen of
the selected group.