Mitsubishi Electric AE-200A Instruction Book page 50

3-4-2. Filter Sign List
A list of units whose filter sign is turned on can be displayed.
Touch [Status List] in the menu bar, and then touch [Filter Sign].
Note: The [Controller] setting will appear when the [System Exp] setting on the [Unit Info.] screen is set to [Expand]. Switch the
[Controller] setting between [AE200], [AE1], [AE2], and [AE3] to display the list for each AE-200 and AE-50 individually.
Controller
Select [AE200] to display
the list for AE-200, and
select [AE1], [AE2], or [AE3]
to display the list for each
AE-50.
Floor name or block name
Group Name
Unit address
Item
Floor name or block name
Group name
Unit address
Number of units whose filter sign
is turned on
Reset
All Reset
WT07190X01
The name of the floor or the block that the unit whose filter sign is turned on belongs to will
appear.
Note: This area will be blank if the unit whose filter sign is turned on does not belong to any
floor or block.
The name of the group that the unit belongs to will appear.
The address of the unit whose filter sign is turned on will appear.
Note: When [AE1], [AE2], or [AE3] is selected as [Controller], AE-50 No. and unit address
will appear. (Example: 1-012)
The number of units whose filter sign is currently turned on will appear.
Touch to reset each filter sign.
Touch to reset all filter signs at once.
50
Description
Number of units whose
filter sign is turned on
Reset
Touch to reset the filter sign.
All Reset
Touch to reset all filter signs
at once.