Mitsubishi Electric AE-200A Instruction Book page 78

[2] Registering air conditioners, Air To Water (PWFY) units, LOSSNAY units, or HWHP (CAHV)
units to a group
(1) To register air conditioners, Air To Water (PWFY) units,
LOSSNAY units, and HWHP (CAHV) units to each group,
touch the "Unit selection" button under the target group
name. A screen to select the units will appear.
Select the group type in the [Model] section, and select
the address numbers of the units to be registered.
The selected unit addresses will appear with an orange
frame. Touch again to deselect.
Note: Each group can contain up to 16 air conditioners.
Note: Air conditioners, Air To Water (PWFY) units, LOSSNAY
units, and HWHP (CAHV) units cannot be combined with
general equipment in one group. To change the registered
units to air conditioners, Air To Water (PWFY) units,
LOSSNAY units, or HWHP (CAHV) units in the group in
which general equipment is registered, unregister the
general equipment first.
Note: The addresses of the units that have been registered
to other groups will appear with a gray background and
cannot be selected.
(2) To change the unit icon to be used, touch the icon. A
screen to select an icon will appear. Select an icon to be
used, and touch [OK].
[3] Registering remote controllers to a group
(1) To register remote controllers to a group, touch the
"Remote controller registration" button under the target
group name. A screen to select the units will appear.
Select the address numbers of the remote controllers to
be registered.
The selected unit addresses will appear with an orange
frame. Touch again to deselect.
Note: Each group can contain up to two remote controllers.
Note: Each group can contain up to four remote and system
controllers combined.
Note: MA remote controllers do not need to be registered to a
group.
WT07190X01
78