4-1-2. Touch Panel Calibration
Touch [Maintenance] in the menu bar, and then touch [Touch Panel Calibration].
Start calibration
(1) Touch [Start calibration].
(2) Touch the white squares in the order they appear,
starting from the top left corner. The white squares will
change to gray when touched.
After all nine squares are touched, the screen will return
to the previous screen.
Note: If each square is not touched within one minute after the
last square is touched, calibration will be cancelled and
the screen will return to the previous screen.
Note: To calibrate the screen properly, use a pointy, but not
sharp object to touch the white dots. Sharp objects may
scratch the touch panel.
WT07190X01
59
White dot