Mitsubishi Electric AE-200A Instruction Book page 72

5-2-5. Unit Information
Touch [Initial Settings] in the menu bar, and then touch [Unit Info.].
Make necessary basic system settings such as unit settings, display format, and sound/brightness settings, and
then touch [Save Settings].
Note: The Unit Information settings may not be accessible if logged in as a building manager.
Unit Information
Set the unit name and unit
ID.
Sound and brightness
Set the sound and
brightness levels.
Display Format
Set the screen display items.
[1] Unit Information
Follow the instructions below to set the unit name, unit ID, and System Expansion setting.
(1) Touch the [Name] button to display the keyboard. Enter the unit name in 40 alphanumeric or symbol characters
or less. The name entered here will be used on the screen of the software that controls multiple AE-200 units
and will also be used as a sender name in the error notification e-mail and e-mail alarm.
Note: The following characters cannot be used: <, >, &, ", or '
(2) Touch the [Unit ID] button to display the keyboard. Enter the unit ID in 6 figures. Use this setting to manage
the multiple unit IDs. The unit ID entered here will be used on the screen of the software that controls multiple
AE-200 units and will also be used as a sender ID in the error notification e-mail and e-mail alarm.
(3) When connecting one or more AE-50 controllers, set the [System Exp] setting to [Expand].
Note: The [System Exp] section does not appear on this screen on the AE-50.
Note: When the [System Exp] setting is set to [Expand], make sure to make network settings for the AE-50 controllers on the
[Network] screen. (Refer to section 5-2-6 "Network" for details.)
[2] Sound and brightness
(1) In the [Sound] section, select the volume (Level 0–3) of the buzzer that sounds when the screen is touched.
(Level 0: No sound)
Note: Although the change will be reflected right away, it will not be saved until [Save Settings] is touched.
(2) In the [Brightness] section, select the brightness (70%, 80%, 90%, 100%) of the screen. (The greater the
value, the brighter the brightness.)
Note: Although the change will be reflected right away, it will not be saved until [Save Settings] is touched.
WT07190X01
72
Display Format
Set the screen display items.
Save Settings
Touch to save the changes
made.