Mitsubishi Electric AE-200A Instruction Book page 28

Item
Controller
Target
Display
target
Date
Controller
Target
Comparison
target
Date
Bar graph
WT07190X01
Select [AE200] to display the data for AE-200, and select [AE1], [AE2], or [AE3] to display the
data for each AE-50.
Select a block name, group name, or address number to display its data.
Note: The selectable items vary, depending on the item selected in the [Display range] field.
Specify a date to display the data.
Note: When [Day] is selected as a Date range, specify "yyyy/mm/dd" from the current month or
the last 24 months.
When [Month] is selected as a Date range, specify "yyyy/mm" from the current month or
the last 24 months.
When [Year] is selected as a Date range, specify "yyyy" from the current year or the last
2 years.
Note: The date will appear in the format that has been set on the [Unit Info.] screen (see
section 5-2-5 "Unit Information").
Select [AE200] to display the data for AE-200 for comparison, and select [AE1], [AE2], or [AE3]
to display the data for each AE-50 for comparison.
Select a block name, group name, or address to display the comparison data.
Note: The selectable items vary, depending on the item selected in the [Display range] field.
Specify a date to display the comparison data.
Note: The same rule as for the [Date] under the [Display target] section apply.
Note: The date will appear in the format that has been set on the [Unit Info.] screen (see
section 5-2-5 "Unit Information").
Select an item to display its data in the bar graph.
Note: The selectable items vary, depending on the items selected in the [Display range] and
[Display target] fields.
Display target
Target value
Electric Energy
Fan operation time
Indoor unit
Thermo-ON time
Thermo-ON time (Cool)
Thermo-ON time (Heat)
Name of the metering device 1
Name of the metering device 2
MCP
(PI controller)
Name of the metering device 3
Name of the metering device 4
*1 "Energy Management License Pack" is required.
*2 If "Energy Management License Pack" has not been registered, only [Day] is available for selection
as a Date range. To select [Month] or [Year], "Energy Management License Pack" is required.
*3 The electric energy consumed by indoor units will appear in the graph. The values are apportioned
based on the setting for [Indoor unit operation apportioning mode] that has been made on the
Energy Management Settings screen, accessible via the Web Browser for Initial Settings.
*4 The indoor unit's cumulative operation time for the selected item will appear in the graph.
• [FAN operation time] is the cumulative duration of time in which the indoor unit is ON.
• [Thermo-ON time] is the cumulative duration of time in which the indoor unit and the compressor
are ON. (Thermo-ON time (Cool): when the Cool mode is selected; Thermo-ON time (Heat): when
the Heat mode is selected; Thermo-ON time: when either mode is selected)
*5 The target values will appear in the graph when the target electric energy values are specified
on the Target Value Setting screen and when the electricity meter is selected in the [Indoor unit
electricity meter] section on the Energy Management Settings screen, accessible via the Web
Browser for Initial Settings.
Description
Display items for bar graph
Display item
*3
*4
*4
*4
*4
28
Display range
Address Group Block
- - V
V *1 V *1 V
V *1 V *1
V V
*1 *1
V *1 V *1
V *1 V *1
V *2 -
V *2 -
V *2 -
V *2 -
V: Item that can be displayed in the graph
*1*5
*1
-
-
-
-
-
-
-
-