Mitsubishi Electric AE-200A Instruction Book page 65

(7) Measurement settings must be made to use temperature
sensors, humidity sensors, and metering devices.
Touch [Function1] in the menu bar, and then touch
[Measurement].
Referring to section 5-3-1, select [AE200], [AE1], [AE2], or
[AE3] in the [Controller] section, make measurement settings
for each AE-200/AE-50, and then touch [Save Settings] on
each settings screen.
(8) Touch the [Date and time] tab.
Referring to section 5-2-3, set the current date, current time,
and daylight saving time, and then touch [Save Settings].
Note: The current date and time set here will be synchronized to each
AE-50.
(9) Touch [
] at the right top of the screen to move to the
[Monitor/Operation] screen.
Percentages of startup process completion will appear.
The initial settings are completed.
Note: When no communication errors occur, the startup process will
take about two or three minutes after the message appears.
When an error is occurring, it may take about five minutes.
WT07190X01
65