Siemens SINUMERIK 840 User Manual page 126

07.90
X
M
Fig. 5.3 Workpiece probe
Example: Calibrating workpiece probe 2 in reference hole 3
in the Z axis (Data as in Fig. 5.6)
The probe length (Z axis) must have been input prior to cycle call in the TO memory, e.g. D98
(in this case value 50).
%MPF 9763
N1 T200
N5 G53 G17 G00 D98 Z100
N10 R12=3 R22=2
R27=1 R28=1
N15 L976
N20 M30
The new trigger point is entered in accordance with the MDC.
©
Siemens AG 1990 All Rights Reserved
SINUMERIK 840/850/880 (BN)
5 Measuring Cycles for Milling Machines and Machining Centres
5.1.2 L975 Calibrating workpiece probe in reference hole (applicate)
F
Trigger
R23=1 R25=0
R33=0 R36=1
6FC5197- AB70
Spindle
Z e.g.:
SF
(D98 in geom. length)
Probe ball
T No. probe
Select length compensation, without ZO
Parameters for calibrating cycle
Cycle call for calibrating in the
Z axis
Z
5–7