D Number Unknown; R10 Zo Memory Number (Zo Determination); R11 Empirical Value/Average Value - Siemens SINUMERIK 840 User Manual

2 Defining Parameters
2.2 R10 Offset number
2.2.1.2

D number unknown

R8 = Extended T address
R9 = T address (tool number)
R10 = 0 No automatic tool offset
R10 = 8 7 6 5 4
2.2.2

R10 ZO memory number (ZO determination)

R10 = 0 ZO memory not automatically included in calculation
1 ... 4 Automatic ZO memory inclusion in ZO G54 ... G57
5 Automatic ZO memory inclusion in ZO G58
6 Automatic ZO memory inclusion in the angle for
coordinate rotation G58 (for angle measurement only)
The difference determined is
included in ZO fine additive
•
included in ZO coarse additive when MDC 804 bit 0 = 1 (ZO groups L960) is set.
•
included in ZO coarse when measuring in JOG
•
2.3 R11 Empirical value / average value
MDC determine the number of empirical
(See machine tool manufacturer's specifications)
Empirical values serve to suppress dimensional deviations that do not follow a trend (see
explanation in Section 1.6.1).
R11 gives the number of the empirical value memory in the cycle setting data memory (SDC).
2–2
3 2 1
Number of cutting edge
Offset number of cutting edge
Always 0
0/1
2
Always 0
0
1
0
1
2
3
and average values.
©
Siemens AG 1990 All Rights Reserved
Length compensation
Radius offset
Normal offset
Inverted offset when machining from
behind
Offset after 4th digit of R10 only
L1 offset 4th digit
L2 offset of R10
Radius offset not effective
6FC5197- AB70
SINUMERIK 840/850/880 (BN)
08.96