Siemens SINUMERIK 840 User Manual page 276

08.96
Explanation of R23:
R23= 4 3 2 1
0 Calibrate
1 Measure
2 Automatic measurement, depending on tool type, type 1-8
0
1
2
R23= 4 3 2 1
0 Measuring (also automatically) of L1 and/or L2 with tool types
1-10, 26, 28, 31-38 with one tool offset number
1 Measuring (automatically only) of L1 and/or L2 and R with tool types
28, 37, 38 with one tool offset number
2 Measuring (automatically only) of L1 and/or L2 and R with tool types
28, 37, 38 with two tool offset numbers
0 Compensate length and radius
1 Compensate length only
2 Compensate radius only
Explanation of R30: NC-MD 157 = x2xx
R30=1 Abscissa
R30=2 Ordinate
R30=3 Applicate
NC-MD 157 = x1xx and MDZ 7002 bit 1 =0:
Axes exchanged
Axis definition via R30
R30=1 Ordinate
R30=2 Abscissa
NC-MD 157 = x1xx and MDZ 7002 bit 1 =1:
Axes not exchanged
Axis definition via R30 after G18 plane Z X
R30=1 Abscissa
R30=2 Ordinate
©
Siemens AG 1990 All Rights Reserved
SINUMERIK 840/850/880 (BN)
Tool length
in TO memory
before after
measurement
PF PF
PF SF
SF SF
(X)
(Y)
(Z)
(X)
(Z)
(Z)
(X)
6FC5197- AB70
10 Lists
10.1 Overview of transfer parameters
If 3rd decimal place of
R23=1 or 22F
10–19