Measuring Cycle Alarms - Siemens SINUMERIK 840 User Manual

9 Alarms

9.2 Measuring cycle alarms

9.2 Measuring cycle alarms
The following alarm texts are stored in the UMS.
They appear in the alarm line on the screen when an alarm occurs.
Alarm
Alarm Text
No.
4000 Cancel alarm
4001 Check MDC 0/1
4002 Check MDC 2/3
4003 Check MDC 1000 - 1019
4004 Load MDC inhibited
4005 MDC area exceeded
4006 NC type or NC SW version wrong
4007 Wrong MC programs loaded
4008 Check MDC (Nxxxx)
4009 Measurement not possible
4010 Probe is defective
4011 Probe does not switch
4012 Probe collision
9–4
Cancel Alarm
by ...
©
Siemens AG 1990 All Rights Reserved
SINUMERIK 840/850/880 (BN)
08.96
6FC5197- AB70