Two Straight Lines (Ang1, X3 - Siemens SINUMERIK 840Di sl Programming Manual

Hide thumbs Also See for SINUMERIK 840Di sl:

Table of Contents

Motion commands

4.14 Contour definitions

N10 X5 Z70 F1000 G18

N20 X88.8 ANG=110 or (Z39.5 ANG=110)

Two straight lines (ANG1, X3... Z3... ANG2)

The intersection of the two straight lines can be designed as a corner, curve or chamfer. The

end point of the first of the two straight lines can be programmed by defining the coordinates

or specifying the angle.

X3... Z3... ANG2...

;Approach start position

;Straight line with specified angle

Programming Manual, 11/2006, 6FC5398-1BP10-2BA0

Fundamentals

Show Quick Links

Chapters

Table of Contents